Front Panel Controls
Front Panel LCD
| Table 7 • Standard LCD Displays (Page 11 of 16) |
| |
Parameter | Action/Explanation |
| |
MEDIA POWER UP | Media Power Up |
| This parameter sets the action of the labels when the printer is turned on. |
| • Press the right or left oval to display the choices. |
| Note • For best results with RFID labels, set this parameter to FEED or |
| LENGTH. |
| Default: CALIBRATION |
| Selections: |
| • FEED—feeds the labels to the first registration point. |
| • CALIBRATION—determines the length of the label and adjusts the sensor |
| settings. |
| • LENGTH—In continuous mode, feeds the last stored label length. In |
| non-continuous mode, calibrates based on the maximum label length setting |
| (see Setting Maximum Length on page 46). |
| • SHORT CAL—calibrates label length using the current sensor settings. |
| • NO MOTION—the media does not move. You must press FEED to cause |
| the printer to resynch to the start of the next label. |
| |
HEAD CLOSE | Head Close |
| This parameter sets the action of the labels when the printhead is closed. |
| • Press the right or left oval to display the choices. |
| Note • For best results with RFID labels, set this parameter to FEED or |
| LENGTH. |
Default: CALIBRATION
Selections:
•FEED—feeds the labels to the first registration point.
•CALIBRATION—determines the length of the label and adjusts the sensor settings.
•LENGTH—In continuous mode, feeds the last stored label length. In non-continuous mode, calibrates based on the maximum label length setting (see Setting Maximum Length on page 46).
•SHORT CAL—calibrates label length using the current sensor settings.
•NO MOTION—the media does not move. You must press FEED to cause the printer to resynch to the start of the next label.
54 | R110Xi/R170Xi User Guide | 23063L-003 Rev. 1 12/6/04 |