Printer Operation
Loading the Media
To load roll media, complete these steps:
1.Open the printhead.
2.See Figure 13. Slide the media guide away from the printer frame. You may need to loosen the media guide thumb screw.
Figure 13 • Adjusting the Media Guide
1
2 | 3 | 4 |
1Media guide
2Location of media guide thumb screw
3Media guide on media hanger
4Media hanger
3.Place the roll of media on the media hanger.
4.Push the media core toward the printer frame. Make sure that the labels are aligned with the media core.
5.Adjust the media guide on the media hanger so it just touches but does not restrict the media.
6.See Figure 14. Feed the media under the media guide roller and under the upper media sensor assembly.
Important • Be sure to thread the media under the upper media sensor assembly and the ribbon guide roller. If you thread the media over these, the media blocks the ribbon sensor.
22 | R110Xi/R170Xi User Guide |