Front Panel Controls

Front Panel LCD

 

Table 7 • Standard LCD Displays (Page 4 of 16)

 

 

Parameter

Action/Explanation

 

 

EARLY WARNING

Setting Early Warning

 

When this parameter is enabled, the printer provides warnings when labels or

 

ribbons are running low or when the printhead needs to be cleaned.

 

Note • Labels per roll and ribbon length need to be updated when beginning use of

 

the Early Warning System. Also, the printer does not make any adjustments when

 

power is turned off and on.

 

• Press the right or left oval to display other choices.

 

Default: MEDIA DISABLED, MAINTENANCE OFF

 

Selections: MEDIA DISABLED, MEDIA ENABLED, MAINTENANCE OFF,

 

MAINTENANCE ON

 

To change the Early Warning settings,

 

1. When the LCD displays EARLY WARNING, press the right or left oval until

 

the desired setting is listed on the LCD. (If you are prompted for a password,

 

enter your password using the instructions in Password-Protected Parameters

 

on page 43.)

 

2. Press NEXT/SAVE to access the next early warning option.

 

3. Repeat this process to set the early warning for ribbon or maintenance

 

(printhead cleaning).

 

When the printer detects that less than 15% of the labels or ribbon remain,

 

WARNING MEDIA LOW appears on the LCD. If the alert function has been

 

enabled, an alert is also sent. When the printhead is opened then closed after a

 

media or ribbon warning has been received, the LCD prompts with MEDIA

 

REPLACED?. Press the right oval to select YES to clear the warning and reset

 

the label counter.

 

When setting the Early Warning for maintenance, the LCD prompts HEAD

 

CLEAN?.

 

4. Press the right oval to select YES.

 

5. Press SETUP/EXIT to exit setup mode.

 

6. Press NEXT/SAVE to save changes.

 

 

LABELS PER ROLL

Setting Labels Per Roll

 

This parameter needs to be updated when setting the Early Warning System so the

 

printer can provide early warnings when labels are running low.

 

• Press the right or left oval to display other choices.

 

Default: 900 labels

 

Range: 100 labels to 9999 labels

 

 

LIST FONTS

List Fonts

 

• Press the right oval to print a label that lists the available fonts in the printer,

 

including standard printer fonts plus any optional fonts. Fonts may be stored in

 

RAM, Flash memory, font EPROMs, or font cards.

 

 

LIST BAR CODES

List Bar Codes

 

• Press the right oval to print a label that lists the available bar codes in the printer.

 

 

23063L-003 Rev. 1 12/6/04

R110Xi/R170Xi User Guide

47