Front Panel Controls
Front Panel LCD
| Table 7 • Standard LCD Displays (Page 8 of 16) |
|
|
Parameter | Action/Explanation |
|
|
BAUD | Setting Baud |
| The baud setting of the printer must match the baud setting of the host computer for |
| accurate communications to take place. Select the value that matches the one being |
| used by the host computer. |
| • Press the right or left oval to display other choices. |
| Default: 9600 |
| Selections: 110, 300, 600, 1200, 2400, 4800, 9600, 14400, 19200, 28800, 38400, |
| 57600, 115200 |
|
|
DATA BITS | Setting Data Bits |
| The data bits of the printer must match the data bits of the host computer for |
| accurate communications to take place. Set the data bits to match the setting being |
| used by the host computer. |
| Note • Code Page 850 requires the data bits to be set to 8 bits. |
| • Press the right or left oval to display other choices. |
| Default: 8 BITS |
| Selections: 7 BITS, 8 BITS |
|
|
PARITY | Setting Parity |
| The parity of the printer must match the parity of the host computer for accurate |
| communications to take place. Select the parity that matches the one being used by |
| the host computer. |
| • Press the right or left oval to display other choices. |
| Default: NONE |
| Selections: NONE, ODD, EVEN |
|
|
HOST HANDSHAKE | Setting Host Handshake |
| The handshake protocol of the printer must match the handshake protocol of the |
| host computer for proper communications to take place. Select the handshake |
| protocol that matches the one being used by the host computer. |
| • Press the right or left oval to display other choices. |
| Default: XON/XOFF |
| Selections: XON/XOFF, DSR/DTR, RTS/CTS |
|
|
PROTOCOL | Setting Protocol |
| Protocol is a type of error checking system. Depending on the selection, an |
| indicator may be sent from the printer to the host computer signifying that data has |
| been received. Select the protocol that is requested by the host computer. Further |
| details on protocol can be found in the ZPL II Programming Guide. |
| • Press the right or left oval to display other choices. |
| Default: NONE |
| Selections: NONE, ZEBRA, ACK_NAK |
| Note • Zebra is the same as ACK_NAK, except that Zebra response messages are |
| sequenced. If Zebra is selected, the printer must use DSR/DTR host handshake |
| protocol. |
|
|
R110Xi/R170Xi User Guide | 51 |