Color profile: Disabled

Composite Default screen

Media and Ribbon Requirements

Print quality not only depends on the XiII-Series printer but also on the media and ribbon used. Factors such as reflectivity and contrast are important for bar code scanning applications. Factors such as paper abrasion and temperature requirements are important to maintaining printhead life.

We STRONGLY RECOMMEND the use of Zebra Technologies Corporation-brand supplies for continuous high-quality printing. A wide range of paper, polypropylene, polyester, and vinyl stock has been specifically engineered to enhance the printing capabilities of the Zebra XiII-Series printer and to ensure against premature printhead wear.

Continuous roll media, fanfold media, or cardstock with optional perforations and registration holes may be used. Printhead life may be reduced by the abrasion of exposed paper fibers when using perforated media.

Ribbons used in the Zebra XiII printer MUST be as wide as or wider than the media used. Zebra-brand ribbons provide an extremely smooth backing surface which protects the printhead from abrasion by the media. If the ribbon is narrower than the media, areas of the printhead will be unprotected and will be subject to premature wear.

Since print quality is affected by media and ribbon, printing speeds, and printer operating modes, it is very important to run tests for your applica- tions. This is especially true if you’re operating in Peel-Off mode, where these variables combine with label size, backing content, die-cut depth, and even humidity to affect printer operation.

Unpacking

Save the carton and all packing materials in case shipping is ever required. Inspect the printer for possible damage incurred during shipment.

￿Check all exterior surfaces.

￿Raise the media access door and inspect the media compartment.

Zebra XiII-Series User’s Guide

3

15

H:...Xi2UsersGuideR2.vp

Fri Aug 07 10:34:38 1998