Color profile: Disabled

Composite Default screen

5.Rotate the platen roller and clean thoroughly with solvent and an applicator.

6.Brush/vacuum any accumulated paper lint and dust away from the rollers.

7.Reload ribbon and/or media, close and latch the printhead, close the Front Panel and the Media Compartment Door, and continue printing.

PRINTHEAD

BLACK

MARK

SENSOR

RIBBON

SENSOR

LABEL

PLATEN

PEEL/TEAR

AVAILABLE

ROLLER

BAR

SENSORS

 

 

Figure 11. Cleaning DiagramCleaning the Sensors

The Media, Ribbon, and Label Available Sensors should be cleaned on a regular basis to ensure proper operation of the printer. To locate the position of these sensors, refer to Figure 11 above, Figure 4 on page 16, and Figure 5 on page 17. Brush/vacuum any accumulated paper lint and dust off of these sensors.

Zebra XiII-Series User’s Guide

53

65

H:...Xi2UsersGuideR2.vp

Fri Aug 07 10:36:17 1998