Color profile: Disabled

Composite Default screen

Site Requirements

CAUTION: To insure that the printer has proper ventilation and cooling, do not place any padding or cushioning material under the unit because this restricts air flow.

The Zebra XiII-Series printer may be installed on any solid, level surface of sufficient size and strength to accommodate the physical dimensions and weight of the unit. The area enclosure in which the printer will operate must meet the environmental conditions specified. Electrical power must be available and in close proximity to the printer.

Since the Zebra XiII-Series printer was designed and is fabricated as an industrial-type unit, it will function satisfactorily in areas such as ware- houses, factory floors, and office environments that conform to specified environmental and electrical conditions.

Printer Power-Up

Follow the instructions in this section to connect this printer to a source of electrical power and a data source.

Voltage Selection

The XiII printer auto-adjusts for 90-264 VAC electrical power. No further adjustment is required.

Power Cord

WARNING! For personnel and equipment safety, always use a three-prong plug with a ground (earth) connection.

Make sure that the Power On/Off Switch (located at the back of the printer) is in the off position before connecting the power cable to an electrical outlet.

Depending on how your printer was ordered, a power cord may or may not be included. If one is not included, or if the one included is not suitable for your requirements, refer to “Power Line Cord Specifications” on page 82.

The power cord connector must be plugged into the mating connector on the rear of the printer.

Zebra XiII-Series User’s Guide

5

17

H:...Xi2UsersGuideR2.vp

Fri Aug 07 10:34:39 1998