Color profile: Disabled

Composite Default screen

Peel-Off Mode

(Peel-Off Option Required)

In this mode, once the label is printed the media passes over the Tear- Off/Peel-Off Plate at a sharp angle. The backing material is peeled away from the label and winds around the Backing Rewind Spindle. The media feeds forward until most of the label hangs loose from the backing. The Label Available Sensor detects this label and pauses printing until the operator removes the label, at which time the next label prints.

The Backing Rewind Spindle will hold the backing from a standard-size media roll. To remove the backing from the Rewind Spindle, refer to page 15.

Rewind Mode

(Rewind Option Required)

In this mode, the media and backing are rewound onto a core as the labels are printed.

When the media is in the rest (idle) position, the start of the next label is directly under the printhead. After the label is printed, the media feeds forward until the start of the next label is under the printhead. The media never backfeeds in this mode. The completed labels are rewound onto a core for later use. When the printer completes a batch of labels, printing will stop.

Cutter Mode

(Cutter Option Required)

In this mode, the printer prints the entire label and automatically cuts the label after it is printed. The Cutter Catch Tray “catches” the completed labels.

22

Zebra XiII-Series User’s Guide

34

H:...Xi2UsersGuideR2.vp

Fri Aug 07 10:35:45 1998