Color profile: Disabled

Composite Default screen

4. Copy the file to the Zebra XiII printer.

NOTE: Typically, computers running DOS use the “COPY” command to send a file to the Zebra printer. For example, if your file name is “format1.zpl” then type, “COPY FORMAT 1.ZPL XXXX”, where “XXXX” is the port to which your Zebra printer is connected, for example, “COM1" or ”LPT1".

5.Compare your results with those shown. If your printout does not look like the one shown, confirm that the file you created is identical to the format shown, then repeat the printing procedure. If nothing prints, refer to the “Getting Started” section to make sure your system is set up correctly, otherwise refer to the “Troubleshooting and Diagnostics” section.

Zebra XiII-Series User’s Guide

47

59

H:...Xi2UsersGuideR2.vp

Fri Aug 07 10:35:52 1998