Color profile: Disabled
Composite Default screen
Applicator Interface
The Applicator Interface is an ideal method of integrating XiII printers into custom applications. This interface allows printer control from a personal computer or Programmable Logic Controller (PLC) via one cable attached to a connector located at the rear of the printer. This provides the capability of placing the XiII printers on a production line in a loose loop, print and apply configuration, or other applications where the printer must be controlled by a machine.
Media Supply Spindle
The optional Media Supply Spindle replaces the standard hanger. This is useful for applications that require the printer to be mounted in a non- horizontal position where the standard media hanger prohibits consistent media flow.
Optional Media Supply Fins
Optional Media Supply Fins are available to convert the standard
mm)core diameter to a 1.77 inch (45 mm) core for smaller core media rolls. Simply remove the current fins and install the
Fonts
There is a wide range of optional character fonts that can be purchased for your XiII printer in addition to those fonts which are standard in the unit. Fonts may be purchased on EPROMs or on PCMCIA cards, depending on your needs.
Refer to “Optional Printer Fonts” on page 85 for information about optional fonts. From time to time, additions may be made to the list of available fonts. Contact your sales representative for further information.
Zebra | 73 |
85
H:...Xi2UsersGuideR2.vp
Fri Aug 07 10:36:57 1998