Color profile: Disabled

Composite Default screen

Options

NOTE: Your printer may not have all of the options described in this chapter. Call your sales representative for more information about these options.

Rewind Option

Your Zebra XiII-Series printer may be equipped with the optional Media Rewind capability required for Rewind and Peel-Off modes of operation.

In Rewind Mode, both labels and backing material rewind internally onto a 3-inch core. A Rewind Bracket guides the media back to the Rewind Spindle after printing.

In Peel-off Mode, only the backing rewinds onto the Rewind Spindle. The Peel/Tear Bar separates the label from the backing and the Label Available Sensor activates to allow the operator to remove a printed label before subsequent labels print. Select either the Rewind or Peel-off Print Mode from the front panel display.

Cutter

Your Zebra XiII printer may be equipped with a cutter used to cut the labels after they are printed. The Cutter Option may be installed concurrently with other options including the Rewind Option. The Cutter Option may be factory-installed or it may be installed in the field by a qualified service technician.

The Cutter Option must be enabled by entering the Programming Mode and using the front panel display to select the Cutter Print Mode. Refer to the “Operation” section for additional information. The Cutter Catch Tray may be installed to collect labels, tickets, or tags after being cut.

Zebra XiII-Series User’s Guide

71

83

H:...Xi2UsersGuideR2.vp

Fri Aug 07 10:36:57 1998