ZyAIR 100 Wireless PC Card
Figure 4-4 ZyAIR 100 Utility – WEP Encryption Screen
The Encryption dialog box enables you to identify 4 different encryption key and select one of them to encrypt your transmission data. The key value of your choice may either be:
•Five ASCII character string, or;
•
Select one key as the active key to encrypt wireless data. Then click on the OK button
NOTE: To allow encrypted data communications, you must set the same encryption key values on all wireless stations and/or Access Points. For example, if you use Key 1 on your ZyAIR 100 and the value is (e.g., MyCar), the same value must be assigned to Key 1 for all other client stations. The values you enter on the Encryption dialog box will only be visible the first time you enter the keys. After closing this dialog box, all Key values will be displayed as “xxxxxxxxxxxx” every time the tab is displayed again.
Frag Threshold
The Fragmentation function is used for improving the efficiency when high traffic flows along in the wireless network. If your ZyAIR 100 often transmit large files in the wireless network, you can enable the Fragmentation Threshold by clicking the Enable button and the function will split the packet. The value can be set from 256 to 2432. Default value is Disable.
Parameter Configuration |
