ZyAIR 100 Wireless PC Card

Troubleshooting 5-3

5.4 Problems Communicating With the Computer

Table 5-4 Troubleshooting Communication Problems

PROBLEM CORRECTIVE ACTION
The ZyAIR 100 station
cannot communicate with
the computer in the Ethernet
when the Infrastructure
mode is configured.
Make sure that the Access Point with which the station is associated with
is powered on.
Use the Site Survey utility to verify if the operating radio channel is in
good quality. Or, change the Access Point and all the stations within the
BSS to another radio channel.
Make sure that the station is configured with the same security option with
the Access Point, either turn off or turn on with the same security key.
Make sure that the BSS ID is the same as the Access Point for a roaming-
disabled station, or the ESS ID is the same as the Access Point for a
roaming-enabled station.