ZyAIR 100 Wireless PC Card
Figure 4-7 Diagnostic Tools – Link Quality Test (Master Test Station)
The following table explains the status/statistical information found in the Master Test Station screen.
Table
ITEM | DESCRIPTION |
|
|
Slave/Test | The physical address of the Destination Slave Test Station. (The physical address of |
Address | your wireless station will be displayed when performing Access Point loopback test.) |
|
|
Packet Sent | Total test packets that have been sent. |
|
|
Packet Received | Total responding packets that have been received. |
|
|
Time Elapsed | Total test time. |
|
|
Signal Level | The signal level when receiving the last responding packet. Signal level is calculated |
| as the percentage of its signal level measurement relative to the full signal level. |
|
|
Parameter Configuration |
