
Prestige
Menu 1 - General Setup
System Name=
Location=
Contact Person's Name=
Domain Name=
Edit Dynamic DNS= No
Route IP= Yes
Bridge= No
Press ENTER to Confirm or ESC to Cancel:
FigureFill in the required fields. Refer to the table shown next for more information about these fields.
TableFIELD | DESCRIPTION | EXAMPLE |
|
|
|
System Name | Enter a descriptive name for identification purposes. This name can be | |
| up to 30 alphanumeric characters long. Spaces are not allowed, but |
|
| dashes |
|
|
|
|
Location (optional) | Enter the geographic location (up to 31 characters) of your Prestige. | MyHouse |
|
|
|
Contact Person's | Enter the name (up to 30 characters) of the person in charge of this | JohnDoe |
Name (optional) | Prestige. |
|
|
|
|
Domain Name | Enter the domain name (if you know it) here. If you leave this field | zyxel.com.tw |
| blank, the ISP may assign a domain name via DHCP. You can go to |
|
| menu 24.8 and type "sys domainname" to see the current domain |
|
| name used by your gateway. |
|
| If you want to clear this field just press the [SPACE BAR]. The domain |
|
| name entered by you is given priority over the ISP assigned domain |
|
| name. |
|
|
|
|
Edit Dynamic DNS | Press the [SPACE BAR] to select Yes or No (default). Select Yes to | No |
| configure Menu 1.1 — Configure Dynamic DNS (discussed next). |
|
Route IP | Set this field to Yes to enable or No to disable IP routing. You must | Yes |
| enable IP routing for Internet access. |
|
|
|
|
Bridge | Turn on/off bridging for protocols not supported (for example, SNA) or | No |
| not turned on in the previous Route IP field. Select Yes to turn |
|
| bridging on; select No to turn bridging off. |
|
General Setup |