
Prestige
Menu 11.1 - Remote Node Profile
Rem Node Name= ? | Route= IP |
Active= Yes | Bridge= Yes |
Encapsulation= ENET ENCAP | Edit IP/Bridge= Yes |
Multiplexing= | Edit ATM Options= No |
Service Name= N/A | Telco Option: |
Incoming: | |
Rem Login= N/A | Allocated Budget(min)= N/A |
Rem Password= N/A | Period(hr)= N/A |
Outgoing: | Schedule Sets= N/A |
My Login= N/A | |
My Password= N/A | Session Options: |
Authen= N/A | Edit Filter Sets= No |
| Idle Timeout(sec)= N/A |
Press ENTER to Confirm or ESC to Cancel:
FigureStep 2. Move the cursor to the Edit IP/Bridge field, then press [SPACE BAR] to set the value to Yes
and press [ENTER] to edit Menu 11.3 – Remote Node Network Layer Options.Menu 11.3 - Remote Node Network Layer Options
IP Options: | Bridge Options: |
IP Address Assignment= Static | Ethernet Addr Timeout (min)= 0 |
Rem IP Addr: 0.0.0.0 |
|
Rem Subnet Mask= 0.0.0.0 |
|
My WAN Addr= 0.0.0.0 |
|
NAT= Full Feature |
|
Address Mapping Set=2 |
|
Metric= 2 |
|
Private= No |
|
RIP Direction= Both |
|
Version= |
|
Multicast= |
|
IP Policies= |
|
Press ENTER to Confirm or ESC to Cancel:
FigureBridging Setup |