
Prestige
I cannot get a WAN IP address from the ISP.
ChartSTEPS | CORRECTIVE ACTION |
1The ISP provides the WAN IP address after authenticating you. Authentication may be through the user name and password, the MAC address or the host name.
2The username and password apply to PPPoE encapsulation only. Make sure that you have entered the correct Service Type, User Name and Password (be sure to use the correct casing). Refer to the WAN Setup chapter (web configurator) or the Internet Access chapter (SMT).
A.7 Internet Access
I cannot access the Internet.
ChartSTEPS | CORRECTIVE ACTION |
1Make sure the Prestige is turned on and connected to the network.
2If the DSL LED is off, refer to Section A.1.3.
3Verify your WAN settings. Refer to the WAN Setup chapter (web configurator) or the Internet Access chapter (SMT).
4Make sure you entered the correct user name and password.
5(In Germany) Make sure you have a
Internet connection disconnects.
ChartSTEPS | CORRECTIVE ACTION |
1Check the schedule rules. Refer to the Call Scheduling chapter (SMT).
2If you use PPPoE encapsulation, check the idle
3Contact your ISP.
Troubleshooting |