Prestige
Table 16-1 Menu 11.3 Remote Node Network Layer Options : Bridge Fields
FIELD | DESCRIPTION |
|
|
Bridge (menu 11.1) | Make sure this field is set to Yes. |
|
|
Edit IP/Bridge (menu | Press [SPACE BAR] to select Yes and press [ENTER] to display menu 11.3. |
11.1) |
|
|
|
Ethernet Addr Timeout | Type the time (in minutes) for the Prestige to retain the Ethernet Address |
(min.) (menu 11.3) | information in its internal tables while the line is down. If this information is |
| retained, your Prestige will not have to recompile the tables when the line |
| comes back up. |
|
|
When you have completed this menu, press [ENTER] at the prompt “Press ENTER to confirm or ESC to cancel” to save your configuration or press [ESC] to cancel and go back to the previous screen.
16.2.2 Bridge Static Route Setup
Similar to network layer static routes, a bridging static route tells the Prestige the route to a node before a connection is established. You configure bridge static routes in menu 12.3.1 (go to menu 12, choose option 3, then choose a static route to edit) as shown next.
Menu 12.3.1 - Edit Bridge Static Route
Route #: 1
Route Name=
Active= No
Ether Address= ?
IP Address=
Gateway Node= 1
Press ENTER to Confirm or ESC to Cancel:
Figure 16-3 Menu 12.3.1 Edit Bridge Static Route
The following table describes the Edit Bridge Static Route menu.
| Table |
|
|
FIELD | DESCRIPTION |
|
|
Route # | This is the route index number you typed in Menu 12.3 – Bridge Static Route Setup. |
|
|
Route Name | Type a name for the bridge static route for identification purposes. |
|
|
Bridging Setup |