Prestige 623ME-T User’s Guide

Chapter 22

System Maintenance

This chapter leads you through SMT menus 24.8 to 24.10.

22.1 Command Interpreter Mode Overview

The Command Interpreter (CI) is a part of the main system firmware. The CI provides much of the same functionality as the SMT, while adding some low-level setup and diagnostic functions. Enter the CI from the SMT by selecting menu 24.8. See the included disk or the zyxel.com web site for more detailed information on CI commands. Enter 8 from Menu 24 — System Maintenance. A list of valid commands can be found by typing help or ? at the command prompt. Type “exit” to return to the SMT main menu when finished.

Menu 24 - System Maintenance

1.System Status

2.System Information and Console Port Speed

3.Log and Trace

4.Diagnostic

5.Backup Configuration

6.Restore Configuration

7.Upload Firmware

8.Command Interpreter Mode

9.Call Control

10.Time and Date Setting

11.Remote Management

Enter Menu Selection Number:

Figure 22-1 Command Mode in Menu 24

Copyright (c) 1994 - 2003 ZyXEL Communications Corp.

p623me-t1> ?

 

 

 

Valid commands are:

ether

wan

sys

exit

etherdbg

usb

ip

bridge

p623me-t1>

 

 

 

Figure 22-2 Valid Commands

System Maintenance

22-1