![](/images/backgrounds/127091/127091-253116x1.png)
Prestige
Table
FIELD | DESCRIPTION | EXAMPLE |
|
|
|
Rem Login | Type the login name that this remote node will use to call your |
|
| Prestige. The login name and the Rem Password will be used to |
|
| authenticate this node. |
|
|
|
|
Rem Password | Type the password used when this remote node calls your Prestige. |
|
|
|
|
Outgoing: |
|
|
|
|
|
My Login | Type the login name assigned by your ISP when the Prestige calls |
|
| this remote node. |
|
|
|
|
My Password | Type the password assigned by your ISP when the Prestige calls this |
|
| remote node. |
|
|
|
|
Authen | This field sets the authentication protocol used for outgoing calls. |
|
| Options for this field are: |
|
| CHAP/PAP – Your Prestige will accept either CHAP or PAP when |
|
| requested by this remote node. |
|
| CHAP – accept CHAP (Challenge Handshake Authentication |
|
| Protocol) only. |
|
| PAP – accept PAP (Password Authentication Protocol) only. |
|
|
|
|
Route | This field determines the protocol used in routing. Options are IP and | IP |
| None. |
|
Bridge | When bridging is enabled, your Prestige will forward any packet that | No |
| it does not route to this remote node; otherwise, the packets are |
|
| discarded. Select Yes to enable and No to disable. |
|
Edit IP/Bridge | Press [SPACE BAR] to select Yes and press [ENTER] to display | No |
| Menu 11.3 – Remote Node Network Layer Options. |
|
Edit ATM Options | Press [SPACE BAR] to select Yes and press [ENTER] to display | No |
| Menu 11.6 – Remote Node ATM Layer Options. |
|
Telco Option |
|
|
|
|
|
Allocated Budget | This sets a ceiling for outgoing call time for this remote node. The |
|
(min) | default for this field is 0 meaning no budget control. |
|
|
|
|
Period (hr) | This field is the time period that the budget should be reset. For |
|
| example, if we are allowed to call this remote node for a maximum of |
|
| 10 minutes every hour, then the Allocated Budget is (10 minutes) |
|
| and the Period (hr) is 1 (hour). |
|
Remote Node Configuration |