Prestige 623ME-T User’s Guide

Menu 24.11 - Remote Management Control

TELNET Server:

Server Port = 23Server Access = LAN only

Secured Client IP = 0.0.0.0

FTP Server:

Server Port = 21Server Access = LAN only

Secured Client IP = 0.0.0.0

Web Server:

Server Port = 80Server Access = LAN only

Secured Client IP = 0.0.0.0

Press ENTER to Confirm or ESC to Cancel:

Figure 23-1 Menu 24.11 Remote Management Control

The following table describes the fields in this menu.

Table 23-1 Menu 24.11 Remote Management Control

FIELD

DESCRIPTION

EXAMPLE

 

 

 

Telnet Server

Each of these read-only labels denotes a service that you may use

 

FTP Server

to remotely manage the Prestige.

 

Web Server

 

 

Server Port

This field shows the port number for the remote management

23

 

service. You may change the port number for a service if needed,

 

 

but you must use the same port number to use that service for

 

 

remote management.

 

 

 

 

Server Access

Select the access interface (if any) by pressing the [SPACE BAR].

LAN only

 

Choices are: LAN only, WAN only, All or Disable. The default is

 

 

LAN only.

 

Secured Client IP

The default 0.0.0.0 allows any client to use this service to remotely

0.0.0.0

 

manage the Prestige. Enter an IP address to restrict access to a

 

 

client with a matching IP address.

 

Once you have filled in this menu, press [ENTER] at the message "Press ENTER to Confirm or ESC to Cancel" to save your configuration, or press [ESC] to cancel.

23.2.2 Remote Management Limitations

Remote management over LAN or WAN will not work when:

1.A filter in menu 3.1 (LAN) or in menu 11.5 (WAN) is applied to block a Telnet, FTP or Web service.

23-2

Remote Management