Prestige 623ME-T User’s Guide

14.5 Remote Node Filter

Move the cursor to the Edit Filter Sets field in menu 11.1, then press [SPACE BAR] to select Yes. Press [ENTER] to display Menu 11.5 – Remote Node Filter.

Use Menu 11.5 – Remote Node Filter to specify the filter set(s) to apply to the incoming and outgoing traffic between this remote node and the Prestige and also to prevent certain packets from triggering calls. You can specify up to 4 filter sets separated by comma, for example, 1, 5, 9, 12, in each filter field.

Note that spaces are accepted in this field. The Prestige has a prepackaged filter set, NetBIOS_WAN, that blocks NetBIOS packets (call protocol filter = 1). Include this in the call filter sets if you want to prevent NetBIOS packets from triggering calls to a remote node.

Menu 11.5 - Remote Node Filter

Input Filter Sets: protocol filters= 11, 12

device filters= Output Filter Sets: protocol filters= device filters=

Enter here to CONFIRM or ESC to CANCEL:

Figure 14-5 Menu 11.5 Remote Node Filter (RFC 1483 Encapsulation)

Menu 11.5 - Remote Node Filter

Input Filter Sets: protocol filters= 11, 12

device filters= Output Filter Sets: protocol filters= device filters= Call Filter Sets: Protocol filters= Device filters=

Enter here to CONFIRM or ESC to CANCEL:

Figure 14-6 Menu 11.5 Remote Node Filter (PPPoE Encapsulation)

Remote Node Configuration

14-9