ZyXEL Communications 623ME-T 3.10 DHCP Setup, Table 3-3Internet Connection with PPPoE

	Prestige 623ME-T User’s Guide
	Table 3-3 Internet Connection with PPPoE
LABEL	DESCRIPTION
Modem Type	This field displays the protocol selected in the previous wizard screen.
Protocol	This field displays the encapsulation used for the protocol selected in the previous wizard
	screen.
Service Name	Type the name of your PPPoE service here.
User Name	Configure User Name and Password fields for PPPoE encapsulation only. Enter the user
	name exactly as your ISP assigned. If assigned a name in the form user@domain where
	domain identifies a service name, then enter both components exactly as given.
Password	Enter the password associated with the user name above.
IP Address	A static IP address is a fixed IP that your ISP gives you. A dynamic IP address is not fixed;
	the ISP assigns you a different one each time you connect to the Internet. The Single User
	Account feature can be used with either a dynamic or static IP address.
	Select Obtain an IP Address Automatically if you have a dynamic IP address; otherwise
	select Static IP Address and type your ISP assigned IP address in the IP Address text box
	below.
Connection	Connect on Demand: Max. Idle Time specifies an idle time-out (in seconds). The default
	setting for this field is, which means the Internet session does not timeout.
	The schedule rule(s) in SMT menu 26 has priority over your Connection settings.
Back	Click Back to go back to the first wizard screen.
Finish	Click Finish to save and complete the wizard setup.

3.10 DHCP Setup

DHCP (Dynamic Host Configuration Protocol, RFC 2131 and RFC 2132) allows individual clients to obtain TCP/IP configuration at start-up from a server. You can configure the Prestige as a DHCP server or disable it. When configured as a server, the Prestige provides the TCP/IP configuration for the clients. If you turn DHCP service off, you must have another DHCP server on your LAN, or else the computer must be manually configured.

Wizard Setup 3-7