ZyXEL Communications 623ME-T 10.1 SMT Introduction, 10.1.1 Procedure for SMT Configuration via Telnet, 10.1.2 Prestige SMT Menu Overview, Introducing the SMT, Run, Step, Step, Step, Start

Prestige 623ME-T User’s Guide

Chapter 10

Introducing the SMT

This chapter explains how to access and navigate the System Management Terminal and gives an overview of its menus.

10.1 SMT Introduction

The Prestige’s SMT (System Management Terminal) is a menu-driven interface that you can access from a terminal emulator through the console port or over a telnet connection.

10.1.1 Procedure for SMT Configuration via Telnet

The following procedure details how to telnet into your Prestige.

Step 1. In Windows, click Start (usually in the bottom left corner), Run and then type “telnet 192.168.1.1” (the default IP address) and click OK.

Step 2. For your first login, enter the default password “1234”. As you type the password, the screen displays an asterisk “*” for each character you type.

Password : xxxx

Figure 10-1 Login Screen

Step 3. After entering the password you will see the main menu.

Please note that if there is no activity for longer than five minutes (default timeout period) after you log in, your Prestige will automatically log you out. You will then have to telnet into the Prestige again.

10.1.2 Prestige SMT Menu Overview

The following figure gives you an overview of the various SMT menu screens of your Prestige.

Introducing the SMT 10-1