Prestige 623ME-T User’s Guide

The following figure shows how you apply NAT to the remote node in menu 11.1.

Menu 11.3 - Remote Node Network Layer Options

IP Options:

Bridge Options:

IP Address Assignment = Dynamic

Ethernet Addr Timeout(min)= N/A

Rem IP Addr = 0.0.0.0

 

Rem Subnet Mask= 0.0.0.0

 

My WAN Addr= N/A

 

NAT= SUA Only

Address Mapping Set= N/A

Metric= 2

Private= No

RIP Direction= None

Version= RIP-1

Multicast= None

IP Policies=

Enter here to CONFIRM or ESC to CANCEL:

Figure 17-2 Menu 11.3 Applying NAT to the Remote Node

Step 1. Enter 11 from the main menu.

Step 2. When menu 11 appears, as shown in the following figure, type the number of the remote node that you want to configure.

Step 3. Move the cursor to the Edit IP/Bridge field, press [SPACE BAR] to select Yes and then press [ENTER] to bring up Menu 11.3 - Remote Node Network Layer Options.

Select None to disable NAT or SUA Only to enable the Address Mapping Set ofmenu 15.2.

17-2

NAT