Prestige 623ME-T User’s Guide

21.3.2 Restore Using FTP Session Example

ftp> put config.rom rom-0 200 Port command okay

150 Opening data connection for STOR rom-0

226 File received OK

221 Goodbye for writing flash

ftp: 16384 bytes sent in 0.06Seconds 273.07Kbytes/sec. ftp>quit

Figure 21-4 Restore Using FTP Session Example

Refer to section 21.2.5 to read about configurations that disallow TFTP and FTP over WAN.

21.4 Uploading Firmware and Configuration Files

This section shows you how to upload firmware and configuration files. You can upload configuration files by following the procedure in the previous Restore Configuration section or by following the instructions in Menu 24.7.2 – System Maintenance – Upload System Configuration File (for console port).

WARNING!

DO NOT INTERRUPT THE FILE TRANSFER PROCESS AS THIS MAY

PERMANENTLY DAMAGE YOUR PRESTIGE.

21.4.1 Firmware File Upload

FTP is the preferred method for uploading the firmware and configuration. To use this feature, your computer must have an FTP client.

When you telnet into the Prestige, you will see the following screens for uploading firmware and the configuration file using FTP.

21-8

Firmware and Configuration File Maintenance