ZyXEL Communications AES-100 Bridge Commands, Device Command, Filter Command, Filterage Command

AES-100 User’s Guide

-Bridge port 9 (ADSL port 8) allowed to bridge port 1 (Ethernet port) only

It is recommended that you do not alter these settings, or the AES-100 may not work correctly.

The default VLAN settings allow each ADSL port to communicate back and forth with only the Ethernet port, and not with other ADSL ports. The following figure illustrates this.

Figure 6-1 Default VLAN Settings

6.3Bridge Commands

6.3.1Device Command

Syntax:

device

The device command shows information on all bridge ports.

6.3.2Filter Command

Syntax:

filter

The filter command displays the filtering database.

6.3.3Filterage Command

Syntax:

filterage [age]

where

age = aging out timer period in seconds

6-2 Bridge Configuration