AES-100 User’s Guide

The filterage command sets or shows the aging out timer period of the filtering database. It is recommended that you use the default setting. If the time interval is reduced to a setting that is too short, it could increase broadcast traffic and reduce the available bandwidth.

6.3.4Flush Command

Syntax:

flush [port]

where

[port] = bridge port number, from 1 to 9

The flush command flushes out the filtering database of the specified bridge port. If the <port> field is omitted, this command will flush out the filtering databases of all ports.

6.3.5Info Command

Syntax:

info

The info command shows the software number of the bridge implementation and the maximum size of the filtering database.

6.3.6Status Command

Syntax:

status

The status command displays the bridge status.

6.4Port-Based VLAN Commands

6.4.1Portfilter Command

Syntax:

portfilter [<source port> all<dest ports>]

where

<source port> = incoming bridge port number, from 1 to 9 all = all bridge ports are allowed outgoing ports

<dest ports> = the allowed outgoing bridge port number, separate by a space if there is more than one port

Bridge Configuration

6-3

Page 39
Image 39
ZyXEL Communications AES-100 manual Port-Based Vlan Commands, Flush Command, Info Command, Portfilter Command