ZyXEL Communications AES-100 manual Viii

AES-100 User’s Guide

5.3.2		Status Command	5-1
Chapter 6		Bridge Configuration	6-1
6.1	Bridge Port Numbers		6-1
6.2	Port -Based VLAN		6-1
6.2.1		Default Settings of Port-Based VLAN	6-1
6.3	Bridge Commands		6-2
6.3.1		Device Command	6-2
6.3.2		Filter Command	6-2
6.3.3		Filterage Command	6-2
6.3.4		Flush Command	6-3
6.3.5		Info Command	6-3
6.3.6		Status Command	6-3
6.4	Port -Based VLAN Commands		6-3
6.4.1		Portfilter Command	6-3
Chapter 7		IP Configuration	7-1
7.1	Setting the IP Address		7-1
7.2	General IP Commands		7-2
7.2.1		Config Command	7-2
7.2.2		Ping Command	7-3
7.2.3		Statistics Command	7-3
7.2.4		Version Command	7-3
Chapter 8		Remote Management	8-1
8.1	Management by Telnet		8-1
8.2	SNMP Management		8-1
8.2.1		Supported MIBs	8-2
8.3	SNMP Access Configuration		8-2
8.3.1		SNMP Access Read/Write Command	8-2
8.3.2		SNMP Access Delete command	8-3
8.3.3		SNMP Access Flush Command	8-3
8.3.4		SNMP Access List Command	8-3
8.4	SNMP Trap Configuration		8-3
8.4.1		Supported Traps	8-3
viii			Table of Contents