Maxtor 10K III manual 9Table5-134, Read Defect Data 10 Command-Data Format

SCSI Description

￿￿￿￿4'#&The￿&'('%6READ DEFECT￿#DATA￿%QOOCPF(10) command￿￿￿￿￿￿￿￿￿directsJ￿the drive to report defect information about the drive’s medium. Refer to the FORMAT UNIT command for information about defects. The data format and field descriptions are shown in Table 5-134and Table 5-135respectively. The data sent to the host in the command’s data- in buffer transfer consists of a four-byte Defect List header (Table 5-138and

Table 5-139),followed by any Defect Descriptors (Table 5-136and Table 5-137). The READ DEFECT DATA (10) Command Descriptor Block is shown in Table 5-142;the data fields are described in Table 5-135.

READ DEFECT DATA (10) Command-Data Format

$[VG0$KV		￿	￿	￿Operation￿		Code￿(37h)		￿		￿	￿
	1				Reserved
	2		Reserved		Plist		Glist		Defect List Format
3	-				Reserved
7	- 8	(MSB)			Allocation Length
	9Table5-134										(LSB)
					Control

Maxtor Atlas 10K III 5-111