Maxtor 10K III manual +DB +DB P1, +C/D, +I/O +Db

Installation

￿￿￿￿￿￿￿￿RKP￿9KFG￿6DNG￿￿￿￿￿￿￿5%5+%QPPGEVQT68-Pin Wide￿￿￿.8&LVD Pin Assignments

+DBSIGNALNAME(12)	CONNUMBER1ECTORTACT	CABLE1 NUMBERCONDUCTOR2		CONNUMBER35ECTORTACT	–SIGNALDBNAME(12)
+DB (13)	2	3	4	36	–DB (13)
+DB (14)	3	5	6	37	–DB (14)
+DB (15)	4	7		38	–DB (15)
+DB (P1)		9	10	39	–DB (P1)
+DB (0)		11	12	40	–DB (0)
+DB (1)	7	13	14	41	–DB (1)
+DB (2)	8	15	16	42	–DB (2)
+DB (3)		17	18	43	–DB (3)
+DB (4)	10	19	20	44	–DB (4)
+DB (5)	11	21	22	45	–DB (5)
+DB (6)	12	23	24	46	–DB (6)
+DB (7)	13	25	26	47	–DB (7)
+DB (P)	14	27	28	48	–DB (P)
GROUND	15	29	30	49	GROUND
DIFFSENS	16	31	32	50	GROUND
TERMPWR	17	33	34	51	TERMPWR
TERMPWR	18	35	36	52	TERMPWR
RESERVED	19	37	38	53	RESERVED
GROUND	20	39	40	54	GROUND
+ATN	21	41	42	55	–ATN
GROUND	22	43	44	56	GROUND
+BSY	23	45	46	57	–BSY
+ACK	24	47	48	58	–ACK
+RST	25	49	50	59	–RST
+MSG	26	51	52	60	–MSG
+SEL	27	53	54	61	–SEL
+C/D	28	55	56	62	–C/D
+REQ	29	57	58	63	–REQ
+I/O	30	59	60	64	–I/O
+DB (8)	31	61	62	65	–DB (8)
+DB (9)	32	63	64	66	–DB (9)
+DB (10)	33	65	66	67	–DB (10)
+DB (11)	34	67	68	68	–DB (11)

Note: The conductor number refers to the conductor position when using 0.635 mm (0.025 inch) centerline flat ribbon cable. Other cable types may be used to implement equivalent contact assign- ments.

￿￿￿￿￿￿￿￿￿￿2KPThe￿9KFGcable￿/CVKPIplug connector￿%QPPGEVQTthat mates with the 68-pin hard disk drive connector is the AMP AMPLIMITE .050 Series III, part number 749925-5.

3-16 Maxtor Atlas 10K III