Maxtor 10K III manual Data, Reassign, Bl Cks, Diagn Stic, Send Diagnos, Test Unit Ready Verify

			SCSI Description
%QOOCPF	.GPIVJ￿KP￿%&$	&CVC￿1WV￿￿6Q￿&TKXG￿	&CVC￿+P￿￿6Q￿+PKVKCVQT￿
			READ BUFFER Header (4)
READ BUFFER	Allocation	---	Mode-zero Buffer (512) or
			Section of Drive’s DRAM or
			READ BUFFER Desc. (4)
READ CAPACITY	Allocation	---	READ CAPACITY data (8)
READ DEFECT	Allocation	---	• Defect List (Hdr) (4)
DATA			• Defect Descriptors
	Byte Transfer		• Data (512
READ LONG	(Must be 562)	---	• LBA Tag (2)
			• EDC (2)
			• ECC (46)
READ SKIP MASK
REASSIGN	0	Defect List Header(4)	Defect Descriptors
BL CKS
RECEIVE			Diagnostic Page
DIAGN STIC
	Allocation	---	• ECC (25)
RESULTS
RELEASE	0	---	---
REPORT DEVICE
IDENTIFIER
REQUEST SENSE	Allocation	---	Sense Data (18)
	0
RESERVE	(Extent List	---	---
	Option not
	supported)
REZERO UNIT	0	---	---
Command	Length in CDB	Data Out (To Drive)	Data In (To Initiator)
SEEK (6)(10)	0	---	---
SEND DIAGNOS-	Parameter List	Diagnostic Page	---
TIC
SET DEVICE
IDENTIFIER
START STOP UNIT	0	---	---
SYNCHRONIZE	0	---	---
CACHE
TEST UNIT READY	0	---	---
VERIFY	Transfer	Data	---
WRITE (6)(10)	Transfer	Data	---
WRITE AND VERI-
FY	Transfer	Data	---
		Zeros (4)
		Mode-zero buffer (512)
	Parameter List	or Data to put into DRAM	---
WRITE BUFFER		or Microcode image
		(262,144)
		or Microcode image
		(successive 16 KB pieces)

Maxtor Atlas 10K III 5-11