SCS I Description
M axtor Atlas 10K III 5-37
Log Sense data pages require special interpretation and also are
subject to change. For assistance with the Log Sense data pages,
contact your Maxtor Applications Engineer.
The drive collects operational info rmation and stores these statistics as log data. Log
data are grouped by category into log pages. The LOG SENSE command allows an
initiator to r etrieve the stored log data. The LOG SENS E comma nd is a
complementary co mmand to the LOG SELECT command.
Each log pag e contai ns one or more piec es of infor mation. Ea ch piece of inf ormati on
is referred to as a parameter. There are two types of parameters: values and lists. In
general, error and performance counters are reported as values. For example, the count
of “Hardware Idled Due To Invali d Command” is returned as a 32-bit integer. Events
are reported as lists. For example, the la st known failure might be reported with the
ASC II stri ng “Last known failure code 960A(X)”.
Table Table 5-44 lists the log pages supported by the drive. Contact your M axtor
Applications Engineer for more information.
Disk Drive Log Pages
Page code s 2Fh, 31h, 35 h, 36 h, 37h, 38h, 39h, 3Ah, 3Bh, 3Dh, 3 Eh,
and 3Fh are vendor-specific pages that are unique to Maxtor drives.
Conta ct you r Max t or re p res enta tiv e for more i n form at i o n .
00h Supported Log Pages
01h Buffer Overruns and Underruns
02h Write Error Counter
03h Read Error Counter
05h Verify Error Counter
06h Non-Medium Error Counter Page
07h Last n-Error Event s Page
08h Format Status Page
0Fh Applica ti on Client Page
10h Self Test Result s Page
2Fh1EWS Status
36h1Maxtor Reserved
37h1Maxtor Reserved
38h1Maxtor Reserved
39h1Maxtor Reserved
3Ah1Maxtor Reserved
3Bh1Maxtor Reserved
3Dh1Maxtor Reserved
3Eh1Maxtor Reserved
3Fh Maxtor Reserved