Maxtor 10K III manual $Vg, Device Identification Page Data Format

SCSI Description

￿￿￿￿￿￿￿￿&GXKEGThe￿+FGPVKHKECVKQPDevice Identification￿2CIG￿￿￿￿PageJ￿￿5%5+provides￿￿￿10the.;means￿to retrieve zero or more identification descriptors that apply to the logical unit (Table 5-33and Table 5-34).

Device Identification Page - Data Format

$[VG0	$KV	Peripheral Qualifier￿					Peripheral￿		Device￿	Type￿(0)	￿
		(0)					(Direct Access Device)
1						Page Code (83h)
						Reserved
3					Page Length (24h for SCSI)
4			Reserved						Code Set (1)
5		Reserved			Association (0)			Identifier Type (2)
6						Reserved
7					Identifier Length (8h)
8 – 15				EUI-64 (Value Stored in Configuration Page 30h)
16			Reserved						Code Set (2)
17		Reserved			Association (0)			Identifier Type (1)
18						Reserved
19					Identifier Length (14h)
20 – 27		Table5-33			Vendor Identifier (“Maxtor “)
28 – 39						Drive Serial Number

U160 SCSI uses Quantum an the Vendor ID while U320 SCSI uses Maxtor as the Vendor ID.

Device Identification Page-Field Description

		This field specifies the code set used for the Identifier field. Applicable val-
		ues are:
		Value Description
Code(KGNFSet￿		0h Reserved	&GHKPKVKQP
		1h The Identifier field contains binary values
		2h The Identifier field contains ASCII graphic codes (code values 20h
		through 7Eh)
		3h – Fh Reserved
		This field specifies the entity with which the Identifier field is associated.
		Applicable values are:
		Value Description
Association		0h The Identifier field is associated with the addressed physical or logical
Note:		device.
		1h The identifier field is associated with the port that received the request.
	Table	2h5-–343h Reserved

Maxtor Atlas 10K III 5-27