Maxtor 10K III manual 142, Read Defect Data 12 Command-Field Description, Normal user space

			SCSI Description
		READ DEFECT DATA (12) Command-Field Description
		When the value is 0, the returned data does not include the Primary Defect List.
(KGNFPList￿		When the value is 1, the returned data&GUETKRVKQPincludes the Primary Defect List. The defects
		are returned in ascending order.
		When the value is 0, the returned data does not include the Grown Defect List.
		When the value is 1, the returned data includes the Grown Defect List. The defects
GList		are returned in order of occurrence.
		When both PList and GList are set to 1, the Primary Defect List and the Grown Defect
		List are returned. The Plist is returned followed by the Glist (the lists are not merged).
		When both are set to 0, only the Defect List Header (Table 5-144)is reported to the
		initiator.
Defect List		This field specifies the format in which the defect descriptors are to be returned. The
Format		supported formats are:
		000b	￿
			Block Format (Table 5-142).
		100b	Bytes from the Index (Table 5-143). The data returned from this
			mode does not include defects outside normal user space.
		101b	Physical Sector Format (Table 5-143). Default format. The de-
			fects returned from this mode do not include defects outside
	Table5-141
			normal user space.
			Vendor-Unique Format. This format is valid only for the READ
		110b	DEFECT DATA commands. The data returned from this mode
			does not include defects outside normal user space. Note that
			the vendor-unique format is proprietary in nature and thus is not
			documented in this Product Manual.

1All in-line spared blocks do not have an associated LBA, and, therefore, will not be seen in Logical Block Format.

Table 5-142shows the Block Format returned when the Defect List Format is 000b.

Table5-143		Table5-142	Defect Descriptor-Block Format
			Maxtor Atlas 10K III	5-115
$0[VG-$3KV	￿￿￿Defective￿Block Address￿￿￿			￿

Table 5-143shows the Defective Bytes From Index Format when the Defect List Format is 100b or the Physical Sector Format when the Defect List Format is 101b.

Defect Descriptor-Bytes From Index Format, or Physical Sector Format

$0[VG-$2KV	￿￿		￿Cylinder￿Number of￿Defect ￿￿	￿
3			Head Number of Defect
4 - 7		Defective Bytes From Index / Defective Sector Number