Maxtor 10K III manual Qfg

SCSI Description

5GPUG0x04-G[￿

Hdwe

Error

5GPUG￿	5GPUG￿	%CVGIQT[	/GUUCIG			/GCPKPI
			FAILED
%QFG	3WCNKHKGT	DER	EC_SVOT_RAW_SEEK_		LBA mismatch error.
0x40	0x8C		EC_LBA_ERR
0x40	0x8D	HW	EC_ETM_FAIL	RE	ETM test failure, drive failed to
					spin.
0x40	0x8E	HW	EC_TARGET RPM		Could not achieve target RPM.
			FAILURE
0x40	0xA0	SVOT	EC_SVOT_FAIL INCMP		Test did not complete.
0x40	0xA1	SVOT	EC_SVOT_FAIL	MP	Test completed successfully, but
					failed.
0x40	0xA2	SVOT	EC_SVOT_INVALID PARM		Invalid parameter was received.
			EC_SVOT_INVALID		Invalid data in servo record. Pre-
0x40	0xA3	SVOT	RECORD_DATA		vented algorithm from complet-
					ing.
0x40	0xA4	SVOT	EC_SVOT_RECORD_		Servo record did not complete
			TIMEOUT
0x40	0xA5	SVOT	EC_SVOT_READ SEEK_		Read seek failed.
			FAILED
0x40	0xA6	SVOT	EC_SVOT_WRITE SEEK_		Write seek failed.
0x40	0xA7	SVOT	FAILED		Raw seek failed.
0x40	0xA8	SVOT	EC_SVOT_SVO_TEST_		Servo Diagnostic Test running.
			RUNNING
0x40	0xA9	SVOT	EC_SVOT_INVALID_97_		Invalid 97/98 super cmd seq.
			98_SEQ		Must send 97 before 98
0x40	0xAA	SVOT	EC_SVOT_CMD_97_		Super Command 97 already run-
			RUNNING		ning.
0x40	0xAB	SVOT	EC_SVOT_CMPLX_MAG_		Complex magnitude is zero.
			IS_0
0x40	0xAC	AVAIL	EC_SVOT_BCV_WRITE_		Could not complete the
			FAILURE		low-level bcv write function
0x40	0xAD	AVAIL	EC_SVOT_CMPLX_DIV_		Got a divide by zero error in com-
			BY_0		plex divide.
0x44	0x00	SYS	EC_ASSERT_ERROR		Logical assertion (firmware con-
					sistency check)
0x44	0x84	SYS	EC_INSUF_BUF		Insufficient buffer memory for
					operation
0x90	0x01	SER	EC_SERIAL_RECEIVE_		Serial Port Packet Receive Error.
			ERROR

5-148 Maxtor Atlas 10K III