This chapter explains how to unpack, configure,+056#mount, and%JCRVGT..connect#6+10the ￿￿ Maxtor Atlas 10K III hard disk drive prior to operation. It also explains how to start up and operate the drive.

￿￿￿￿￿5#('6;CHGV[For your￿2TGECWVKQPU￿￿*#0&safety, .follow+0)￿￿￿￿￿all safety'.'%64156#6+%procedures described￿&+5%*#4)'here and in other￿2416'%6+10sections of the manual.

Remove power from the computer system (or expansion unit) before installing or removing the drive to prevent the possibility of electrical shock or damage to the drive. Unplug the unit containing the drive to provide an added measure of safety.

Read, understand, and observe all label warnings.

￿￿￿￿￿*CPFNKPIDamage to the drive can occur as the result of careless handling, vibration, shock, or electrostatic discharge (ESD). Always handle the drive with care to avoid damage to the precision internal components.

A 1/4-inch drop onto a hard surface can damage the drive.

Follow these guidelines to avoid damage to the drive:

Always observe prescribed ESD precautions.

Keep the drive in its anti-static bag until ready to install.

Always use a properly fitted wrist strap or other suitable ESD protection when handling the drive.

Hold drive only by its sides. Do not touch any components on the

%#76+10PCBA. ￿

Maxtor Atlas 10K III 3-1

Page 27
Image 27
Maxtor 10K III manual #76+10PCBA