General Description

2TQFWEV￿CE'/+Mark￿'/5authorization￿3WCNKHKECVKQPUis granted￿by TUV Rheinland in compliance with our qualifying under EN 55022:1994 and EN 50082-1:1997.

-Tick Mark is an Australian authorization marked noted on Maxtor’s disk drive products. The mark proves conformity to the regulatory compliance document AS/NZS 3548: 1995 and BS EN 55022: 1995.

Maxtor’s disk drives are designed as a separate subassembly that conforms to the FCC Rules for Radiated and Conducted emissions, Part 15 Subpart J; Class B when installed in a given computer system.

￿￿￿*#4&9#4'The Maxtor￿4'37+4'/'065Atlas 10K III hard disk drive is compatible with host computers and controllers that provide a 68-pin Wide, or 80-pin SCA-2 interface. A 50-pin to 68- pin adapter is required to use the 68-pin Wide drive in a 50-pin cabling configuration.

Termination is required on the Maxtor Atlas 10K III Hard disk drives as they do not support on-board SCSI termination.

2-4 Maxtor Atlas 10K III

Page 26
Image 26
Maxtor 10K III manual General Description