Maxtor 10K III manual Error Recovery

Table of Contents

5.42	START STOP UNIT Command (1Bh)	5-166
5.43	SYNCHRONIZE CACHE Command (35h)	5-167
5.44	TEST UNIT READY Command (00h)	5-168
5.45	VERIFY Command (2Fh)	5-169
5.46	WRITE (6) Command (0Ah)	5-170
5.47	WRITE (10) Command (2Ah)	5-171
5.48	WRITE AND VERIFY Command (2Eh)	5-172
5.49	WRITE BUFFER Command (3Bh)	5-173
5.50	WRITE LONG Command (3Fh)	5-175
5.51	WRITE SAME Command (41h)	5-176
5.52	WRITE SKIP MASK Command (EAh)	5-177

%JCRVGT('#674.1￿￿KEY'￿&'5%4+26+105FEATURES			6-1
.2	PREFETCH		6-2
.3	WRITE-BACK CACHING		6-3
.	ZERO LATENCY READ/WRITE		6-3
.5	DISCONNECT-RECONNECT		6-3
.	TRACK AND CYLINDER SKEWING		6-3
.	AVERAGE ACCESS TIME		6-4
.8	EMBEDDED SERVO SYSTEM		6-4
.9	DATA INTEGRITY AND SECURITY		6-4
	6.9.1	Media Error Protection	6-4
	6.9.2	Transfer Error Protection	6-4
	6.9.3	Addressing Error Protection	6-4
	6.9.4	Data Sector Reallocation Error Protection	6-5
	6.9.5	Data Verification	6-5
.10	TAGGED COMMAND QUEUING		6-5
.11	COMMAND REORDERING		6-5
.12	BANDED RECORDING		6-6
.13	SPECIAL FUNCTIONS		6-6
6.14	POWER MANAGEMENT		6-6
6.15	DIAGNOSTICS		6-6
	6.15.1 Power On Self Test (POST)		6-7
	6.15.2 Periodic Self-Adjustments		6-7
	6.15.3 Host Diagnostics		6-7
	6.15.4 Log Sense		6-8
6.16	ERROR RECOVERY		6-8
	6.16.1 Seek Error Recovery		6-8
	6.16.2 Data Read Errors		6-8
	6.16.3 Reallocation of Bad Blocks		6-8
6.17	SCSI CONFIGURED AUTOMATICALLY (SCAM)		6-9
6.18	THE ULTRA160 and ULTRA320 LOW VOLTAGE DIFFERENTIAL
	(LVD) SCSI INTERFACE		6-9

viii Maxtor Atlas 10K III