Maxtor 10K III manual 135, $ 4VG -$ 7KV, Read Defect Data 10 Command-Field DescriptionREAD Defect

SCSI Description

	READ DEFECT DATA (10) Command-Field DescriptionREAD DEFECT
	When the value is 0, the returned data does not include the Primary Defect List.
(KGNFPList￿	When the value is 1, the returned data&GUETKRVKQPincludes the Primary Defect List. The defects
	are returned in ascending order.
	When the value is 0, the returned data does not include the Grown Defect List.
	When the value is 1, the returned data includes the Grown Defect List. The defects
GList	are returned in order of occurrence.
	When both PList and GList are set to 1, the Primary Defect List and the Grown Defect
	List are returned. The Plist is returned followed by the Glist (the lists are not merged).
	When both are set to 0, only the Defect List Header (Table 5-138)is reported to the
	initiator.
Defect List	This field specifies the format in which the defect descriptors are to be returned. The
Format	supported formats are:
	000b	Block Format (Table 5-136).￿
		Bytes from the Index (Figure 5-63). The data re-
	100b	turned from this mode does not include defects
		outside normal user space.
Table5-135	101b	Physical Sector Format (Table 5-137). Default for-
		mat. The defects returned from this mode do not
		include defects outside normal user space.
		Vendor-Unique Format. This format is valid only
		for the READ DEFECT DATA commands. The data
	110b	returned from this mode does not include defects
		outside normal user space. Note that the vendor-
		unique format is proprietary in nature and thus is
		not documented in this Product Manual.

1All in-line spared blocks do not have an associated LBA, and, therefore, will not be seen in Logical Block Format.

Table 5-136shows the Block Format returned when the Defect List Format is 000b

Defect Descriptor-Block Format.

$0[VG-$3KV￿￿ ￿Defective￿Block Address￿￿￿ ￿

Table 5-137shows the Defective Bytes From Index Format when the Defect List Format is 100b or the Physical Sector Format when the Defect List Format is 101b.

Defect Descriptor-Bytes From Index Format, or Physical Sector Format

0 - 2	￿TableDefective￿5-136	Cylinder Number of Defect
3		Bytes￿	Head Number of Defect	Sector￿	Number￿	￿
$4[VG-$7KV			From ￿Index / Defective￿
5-112 TableMaxtor5-137Atlas 10K III