Maxtor 10K III manual Db P, Bsy, Sel, Req

Installation

￿￿￿￿￿￿￿￿2KP￿9KFG￿5KPING￿68'PFGF-PinWide￿5%5+Single￿%QPPGEVQT-Ended Pin Assignments

GROUNDSIGNALNAME	CONNUMBER1ECTORTACT	CABLE1 NUMBERCONDUCTOR		CONNUMBER35ECTORTACT	–SIGNALDBNAME(12)
GROUND		3	4	36	–DB (13)
GROUND	3		6	37	–DB (14)
GROUND	4	7	8	38	–DB (15)
GROUND			10	39	–DB (P1)
GROUND		11	12	40	–DB (0)
GROUND	7	13	14	41	–DB (1)
GROUND	8	15	16	42	–DB (2)
GROUND		17	18	43	–DB (3)
GROUND	10	19	20	44	–DB (4)
GROUND	11	21	22	45	–DB (5)
GROUND	12	23	24	46	–DB (6)
GROUND	13	25	26	47	–DB (7)
GROUND	14	27	28	48	–DB (P)
GROUND	15	29	30	49	GROUND
GROUND	16	31	32	50	GROUND
	6CDNG￿￿￿￿￿￿￿
TERMPWR	17	33	34	51	TERMPWR
TERMPWR	18	35	36	52	TERMPWR
RESERVED	19	37	38	53	RESERVED
GROUND	20	39	40	54	GROUND
GROUND	21	41	42	55	–ATN
GROUND	22	43	44	56	GROUND
GROUND	23	45	46	57	–BSY
GROUND	24	47	48	58	–ACK
GROUND	25	49	50	59	–RST
GROUND	26	51	52	60	–MSG
GROUND	27	53	54	61	–SEL
GROUND	28	55	56	62	–C/D
GROUND	29	57	58	63	–REQ
GROUND	30	59	60	64	–I/O
GROUND	31	61	62	65	–DB (8)
GROUND	32	63	64	66	–DB (9)
GROUND	33	65	66	67	–DB (10)
GROUND	34	67	68	68	–DB (11)

Note:

21.Theminusconductorsignnumbernexttorefersasignalto indicatesthe conductoractivepositionlow.when using 0.635

mm(0.025 inch) centerline flat ribbon cable. Other cable types may be used to implement equivalent contact assignments.

Maxtor Atlas 10K III 3-19