Maxtor 10K III manual Fru

SCSI Description

	The Information field contains the following device-type or command-specific informa-
	tion:
Informa-	1) The unsigned logical sector address associated with the sense key.
	2) The difference between the requested length and the actual length in either bytes or
tion
	sectors, as determined by the command. This difference is called the residue.
	3) A description of each of the drive's supported commands definition for this field is
	contained in Table 5-177.
Additional	The Additional Sense Length field indicates the number of addition sense bytes that can
	follow. If the Allocation Block Length specified in the Command Descriptor Block is too
Sense
	small to transfer all of the additional sense bytes, the Additional Sense Length byte value
Length
	is not adjusted to reflect the truncation.
Command-	The Command-Specific Information field is valid only for Sense Data for a failed REAS-
Specific
	SIGN BLOCKS command. It contains either the Logical Block Address of the first defect
Informa-
	descriptor not reassigned or, if all the defect descriptors were reassigned, FFFFFFFFh.
tion
Additional	The Additional Sense Code field indicates further information related to the error or ex-
	ception condition reported in the sense key. If the drive does not have further related
Sense
	information, the additional sense key is set to NO ADDITIONAL SENSE INFORMATION.
Code
	See Table 5-178.
Additional	The Additional Sense Code Qualifier field&GHKPKVKQPindicates detailed information related to the ad-
Sense(KGNF
CodeQual-	ditional sense code. If the drive does not have detailed information, the field is set to 0.
ifier
Field Re-
placeable	The Field Replaceable Unit Code specifies a unit that has failed:
Unit
	Code	FRU
	1	Host
	2	Hard Disk Assembly (HDA)
	3	Printed Circuit Board Assembly (PCBA)
	Sense-Key Specific Valid bit. This bit is 1 for all sense keys listed in Table 5-176(excep-
SKSV	tion: NOT READY and UNIT ATTENTION/RPL Status Change). The SKSV bit and Sense-
	Key Specific bytes may be 0 when the sense key is NOT READY.
Sense-Key	The contents of the Sense-Key Specific field are unique to each sense key. Table 5-177
	summarizes the sense keys for which the drive supplies sense-key specific information.
Specific
	(See SKSV.)

5-136 Maxtor Atlas 10K III