Epson LQ-300+ manual Changing default settings

Changing default settings

Follow these steps to enter the Default Setting mode and change the printer’s default settings:

Note:

❏To print the language selection instructions and the Default Setting mode instructions, you need five or six sheets of A4 or Letter size single-sheet paper, or five or six pages of continuous paper that is at least 279 mm (11 inches) long and 210 mm (8.27 inches) wide.

❏If you use single sheets without an optional cut-sheet feeder, you need to feed a new sheet of paper each time the printer ejects a printed sheet.

1.Make sure paper is loaded and the printer is turned off.

c Caution:

Whenever you turn off the printer, wait at least five seconds before turning it back on; otherwise, you may damage the printer.

2.While holding down the Tear Off (Font) button, turn on the printer. The printer enters the Default Setting mode and prints the language selection instructions (one page).

3.Follow the instructions to select the language you want for the instruction pages.

4.Load the next sheet of paper, if necessary. The printer prints the current settings list (one page).

5.Press down the Tear Off (Font) button. The printer prints the Default Setting mode instructions (three or four pages) in the language you selected. The printed instructions list the default settings you can change, describe how to change them, and show you how the control panel lights help you make settings.

Using the Printer 23