Epson LQ-300+ manual Tear-off edge

Note:

Your tear-off position setting remains in effect until you change it, even if you turn off the printer.

1.Make sure the Tear Off (Font) lights are flashing (the paper is

at the current tear-off position). You may need to press the Tear Off (Font) button to advance the paper to the tear-off position.

2.Open the paper guide cover.

3.Hold down the Pause button for about three seconds. The Pause light begins to flash and the printer enters the Micro Adjust mode.

4.Press the LF/FF D button to feed the paper backwards, or press the Load/Eject U button to feed the paper forwards, until the paper perforation is aligned with the tear-off edge.

tear-off edge

Note:

The printer has a minimum and a maximum tear-off position. If you try to adjust the tear-off position beyond these limits, the printer beeps and stops moving the paper.

40