Pitch
You can select from among six pitch settings.
Font
You can select six fonts in the Default Setting mode. The font selected here appears under Others on the control panel. The fonts
indicated on the control panel cannot be selected in the Default Setting mode.
Auto CR (carriage return)
This setting is available only in the IBM 2390 Plus emulation mode. When auto carriage return is on, each line feed (LF) code or ESC J code is accompanied by a carriage return code. This moves the print position to the beginning of the next line.
Manual feed wait time
This sets the amount of wait time between the time paper is inserted into the paper guide and when it is fed. If the paper feeds before you can adjust its position to your satisfaction, you can increase the wait time.
Buzzer (beeper)
The printer beeps when an error occurs. (See “Using the Error Indicators” on page 86 for more information on printer errors.) If you do not want the printer to beep when an error occurs, turn this setting off.
Roll paper
When you turn on this mode, the printer recognizes that single sheets are not loaded in the printer, so it does not try to eject the
paper and advance it forward to the next page when you press the LF/FF button.
22Using the Printer
