7.Make sure your paper has a clean, straight leading edge. Open the sprocket covers. Fit the first holes of the paper over the sprocket pins and then close the sprocket covers. Slide the right sprocket unit to remove any slack in the paper and then lock it in place.
Note:
Remove any remaining slack by gently pulling the paper from the rear or bottom.
8.To separate the incoming paper from the printed paper, attach the paper guide. Hold it horizontally and fit its notches over the printer’s mounting posts. Then slide the paper guide toward the back of the printer until you feel it click.
9.Attach the printer cover and adjust the paper position with the
10.Make sure the printer cover is closed, but with the paper guide cover open. When the printer receives data, it begins printing automatically.
35
