Epson LQ-300+ manual Paper Handling, Print position is not what you expected

The print position is not what you expected

Printing starts too high or too low on the page, or the bottom part of one page is printed at the top of the next page.

Cause	What to do
Your application software	Check the margin or top-of-form
settings may be incorrect.	position setting in your application
	software.

Page length does not match the length of the paper.

Cause	What to do
The page length setting in	Check the page length set by your
your application may be	application software and adjust it if
incorrect.	necessary.
The printer’s page length	Check Page length for tractor if the
setting for the tractor may not	printer’s default settings. See “About
match the size of the	Your Printer’s Default Settings” on page
continuous paper you are	16.
using.

Regular gaps occur in the printout.

Cause What to do

One-inch skip-over-perforation may be set.

Set skip-over-perforation to off in the Default Setting mode. See “About Your Printer’s Default Settings” on page 16.

Paper Handling

Single sheets do not feed properly

Paper does not feed.

94Troubleshooting