18 Using the Printer
* The options available vary depending on the country of purchase.
**These settings take effect only when IBM 2390 Plus emulation is selected.
Page length for tractor
This setting allows you to set the page length (in inches) for
continuous paper.
Skip over perforation
This feature is available only when continuous paper is selected.
When you select On, the printer provides a one-inch (25.4 mm)
margin between the last line printed on one page and the first line
printed on the next page. Because the program margin settings in
most applications override margin settings made from the control
panel, you should use this setting only if you cannot set your top
and bottom margins using your application.
International character set for
Italic table
ItalicU.S.A., Italic France, Italic Germany,
ItalicU.K., Italic Denmark1, Italic Sweden,
ItalicItaly, Italic Spain1
Pitch 10 cpi, 12 cpi, 15 cpi, 17 cpi, 20 cpi, Proportional
Font OCR-B, Orator, Orator-S, Script C,
Roman T (PS), Sans Serif H (PS)
Auto CR (IBM 2390 Plus)** On, Off
A.G.M. (IBM 2390 Plus)** On, Off
Manual feed wait time 1 second, 1.5 seconds,
2 seconds, 3 seconds, Others
Buzzer On, Off
Roll paper On, Off
Settings Options