Continuous paper does not feed properly
The tractor does not feed the paper.
Cause | What to do |
|
|
The | Check that the |
be in the wrong position. | pulled forward to the |
| position. If not, turn off the printer, |
| move the lever, and turn it on again. |
|
|
The paper may have come off | Reattach the paper to the tractor. |
the tractor. |
|
Paper feeding is crooked or the paper jams.
Cause | What to do |
|
|
The paper supply is | Make sure the paper supply is not |
obstructed. | obstructed by a cable or some other |
| object. |
|
|
The paper supply is too far | Make sure that your paper supply is |
away from the printer. | within 1 meter (3 feet) of the printer. |
|
|
The printer cover may be | Close the printer cover. |
opened. |
|
|
|
The edge guide positions may | Position the edge guides at the |
be incorrect. | |
|
|
The holes on the sides of the | Check that the holes on the sides of the |
paper are misaligned. | paper are aligned with each other. Also |
| make sure the sprocket units are locked |
| and their covers are closed. |
Your paper may be the wrong size or thickness for the printer.
Make sure that the paper size and thickness are within the specified ranges. See “Paper” on page 114 for information on the continuous paper specifications.
