Epson LQ-300+ manual Hot Parts Caution Symbol

❏Unplug the printer and refer servicing to qualified personnel under the following conditions:

i.If the power cord or plug is damaged.

ii.If liquid has entered the printer.

iii.If the printer has been dropped or the cabinet damaged.

iv.If the printer does not operate normally or exhibits a distinct change in performance.

❏Adjust only those controls that are covered by the operating instructions.

❏If you plan to use the printer in Germany, observe the following:

To provide adequate short-circuit protection and over-current protection for this printer, the building installation must be protected by a 10- or 16-amp circuit breaker.

Note for German-speaking users:

Bei Anschluss des Druckers an die Stromversorgung muss sichergestellt werden, dass die Gebäudeinstallation mit einer 10 A- oder 16 A-Sicherung abgesichert ist.

Hot Parts Caution Symbol

KThis symbol is placed on the print head to indicate that the print head may be hot. Never touch the print head just after the printer has been used. Let the print head cool for a few minutes before touching it.

Getting to Know Your Printer 9